A pilot study on psychosocial factors and perceptions of organizational health among a sample of U.S. waste workers.

Solid waste workers encounter a number of occupational hazards that are likely to induce stress. Thus, there are likely to be psychosocial factors that also contribute to their overall perceptions of organizational health. However, attitudes regarding the aforementioned among solid waste workers' have not been assessed. This descriptive, cross-sectional pilot study operationalized the INPUTS Survey to determine workers' perceptions of organizational health and other psychosocial factors of work. Percentage and mean responses to each INPUTS domain are presented in accordance with their survey manual. Pearson's chi-squared tests were run on count data; Fisher's exact tests were run for count data with fewer than five samples. ANOVAs were run on the continuous items. Due to a relatively low sample size (N = 68), two-sided p values < 0.1 were considered statistically significant. Most solid waste worker participants reported high decision authority, that they perceived their management to prioritize workplace health and safety, and had high job satisfaction. However, perceptions of support for health outside of the realm of occupational safety and health was lower. Addressing traditional occupational health hazards continues to take precedence in this industry, with less of a focus on how the social determinants of health may impact workplace health.

Compression stress-strain curve of lithium slag recycled fine aggregate concrete.

As one of the key materials used in the civil engineering industry, concrete has a global annual consumption of approximately 10 billion tons. Cement and fine aggregate are the main raw materials of concrete, and their production causes certain harm to the environment. As one of the countries with the largest production of industrial solid waste, China needs to handle solid waste properly. Researchers have proposed to use them as raw materials for concrete. In this paper, the effects of different lithium slag (LS) contents (0%, 10%, 20%, 40%) and different substitution rates of recycled fine aggregates (RFA) (0%, 10%, 20%, 30%) on the axial compressive strength and stress-strain curve of concrete are discussed. The results show that the axial compressive strength, elastic modulus, and peak strain of concrete can increase first and then decrease when LS is added, and the optimal is reached when the LS content is 20%. With the increase of the substitution rate of RFA, the axial compressive strength and elastic modulus of concrete decrease, but the peak strain increases. The appropriate amount of LS can make up for the mechanical defects caused by the addition of RFA to concrete. Based on the test data, the stress-strain curve relationship of lithium slag recycled fine aggregate concrete is proposed, which has a high degree of agreement compared with the test results, which can provide a reference for practical engineering applications. In this study, LS and RFA are innovatively applied to concrete, which provides a new way for the harmless utilization of solid waste and is of great significance for the control of environmental pollution and resource reuse.

Emission characteristics of condensable particulate matter during the production of solid waste-based sulfoaluminate cement: Compositions, heavy metals, and preparation impacts.

Recycling solid waste for preparing sulfoaluminate cementitious materials (SACM) represents a promising approach for low-carbon development. There are drastic physical-chemical reactions during SACM calcination. However, there is a lack of research on the flue gas pollutants emissions from this process. Condensable particulate matter (CPM) has been found to constitute the majority of the primary PM emitted from various fuel combustion. In this study, the emission characteristics of CPM during the calcination of SACM were determined using tests in both a real-operated kiln and laboratory experiments. The mass concentration of CPM reached 96.6 mg/Nm3 and occupied 87% of total PM emission from the SACM kiln. Additionally, the mass proportion of SO42- in the CPM reached 93.8%, thus indicating that large quantities of sulfuric acid mist or SO3 were emitted. CaSO4 was one key component for the formation of main mineral ye'elimite (3CaO·3Al2O3·CaSO4), and its decomposition probably led to the high SO42- emission. Furthermore, the use of CaSO4 as a calcium source led to SO42- emission factor much higher than conventional calcium sources. Higher calcination temperature and more residence time also increased SO42- emission. The most abundant heavy metal in kiln flue gas and CPM was Zn. However, the total condensation ratio of heavy metals detected was only 40.5%. CPM particles with diameters below 2.5 µm and 4-20 µm were both clearly observed, and components such as Na2SO4 and NaCl were conformed. This work contributes to the understanding of CPM emissions and the establishment of pollutant reduction strategies for waste collaborative disposal in cement industry.

Unraveling the effect of phenolic extract derived from olive mill solid wastes on agro-physiological and biochemical traits of pomegranate and its associated rhizospheric soil properties.

Agricultural waste management poses a significant challenge in circular economy strategies. Olive mill wastes (OMW) contain valuable biomolecules, especially phenolic compounds, with significant agricultural potential. Our study evaluate the effects of phenolic extract (PE) derived from olive mill solid wastes (OMSW) on pomegranate agro-physiological and biochemical responses, as well as soil-related attributes. Pomegranate plants were treated with PE at doses of 100 ppm and 200 ppm via foliar spray (L100 and L200) and soil application (S100 and S200). Results showed increased biomass with PE treatments, especially with soil application (S100 and S200). Proline and soluble sugar accumulation in leaves suggested plant adaptation to PE with low-level stress. Additionally, PE application reduced malondialdehyde (MDA) and hydrogen peroxide (H2O2) contents. Higher doses of PE (S200) significantly improved net photosynthesis (Pn), transpiration rate (E), water use efficiency (WUEi), and photosynthetic efficiency (fv/fm and PIabs). Furthermore, PE treatments enhanced levels of chlorophylls, carotenoids, polyphenols, flavonoids, and antioxidant activity. Soil application of PE also increased soil enzyme activities and microbial population. Our findings suggest the beneficial impact of PE application on pomegranate agro-physiological responses, laying the groundwork for further research across various plant species and soil types to introduce nutrient-enriched PE as an eco-friendly biostimulant.

Solidification/stabilization and optimization of municipal solid waste incineration fly ash with aluminosilicate solid wastes.

Alkali-activation is an effective municipal solid waste incineration fly ash (MSWIFA) solidification/stabilization (S/S) technology. However, the characteristics of calcium-rich silica-poor aluminum phase in MSWIFA easily cause the structural instability and contamination of alkali activated MSWIFA S/S bodies. Therefore, the aluminosilicate solid wastes are used in this work to optimize the immobilization and structural properties. Results showed that incorporation of aluminosilicate solid wastes significantly improved the compressive strength and heavy metals pollution toxicity of MSWIFA S/S bodies. Compared to alkali activated MSWIFA, the compressive strength of S/S bodies with addition of coal fly ash, silica fume and granulated blast furnace slag improved by 31.0%, 47.6% and 50.8% when the curing time was 28 days, respectively. Leachability of Pb, Zn and Cd in these alkali activated MSWIFA S/S bodies was far below the threshold value specified in Standard GB16889. Aluminosilicate solid wastes provided abundant Si/Al structural units, and some new phases such as ettringite(AFt, 3CaO⋅Al2O3⋅3CaSO4⋅32H2O), calcium sulfoaluminate hydrate (3CaO⋅Al2O3⋅CaSO4⋅12H2O) and Friedel's salt (CaO⋅Al2O3⋅CaCl2⋅10H2O) can be detected in S/S matrix with aluminosilicate solid wastes, along comes increased the amount of the amorphous phases. Lower Ca/Si molar ratio tended to form the network structure gel similar to tobermorite with higher polymerization degree. Meanwhile, the silica tetrahedron of the gels changed from the oligomerization state like island to the hyperomerization state like chain, layer network or three-dimensional structure, and average molecular chain length increased. These findings provide theoretical basis for structural properties optimization and resource utilization of MSWIFA S/S matrices.

Analysis of composition characteristics and treatment techniques of municipal solid waste incineration fly ash in China.

The rapid development of the economy and society is causing an increase in the amount of municipal solid waste (MSW) produced by people's daily lives. With the strong support of the Chinese government, incineration power generation has steadily become the primary method of treating MSW, accounting for 79.86%. However, burning produces a significant amount of municipal solid waste incineration fly ash (MSWI-FA), which contains heavy metals, soluble chlorine salts, and dioxins. China's MSWI-FA yield increased by 8.23% annually to 7.80 million tons in 2022. Besides, the eastern region, especially the southeastern coastal region, has the highest yield of MSWI-FA. There are certain similarities in the chemical characteristics of MSWI-FA samples from Northeast, North, East, and South China. Zn and CaO have the largest amounts of metals and oxides, respectively. The Cl content is about 20 wt%. This study provides an overview of the techniques used in the thermal treatment method, solidification and stabilization, and separation and extraction of MSWI-FA and compares their benefits and drawbacks. In addition, the industrial applications and standard requirements of landfill treatment and resource utilization of MSWI-FA in China are analyzed. It is discovered that China's resource utilization of MSWI-FA is insufficient through the study on the fly ash disposal procedures at a few MSW incineration facilities located in the economically developed Guangdong Province and the traditional industrial city of Tianjin. Finally, the prospects for the disposal of MSWI-FA were discussed.

Comprehensive characterization of unscientifically disposed municipal solid waste (MSW) in Kashmir Region, India.

Unscientific dumping of municipal solid waste (MSW) is a common practice in Kashmir. To have an environmentally friendly and sustainable waste management system, MSW was collected from nine study locations of this region. They were air-dried, then oven-dried at 105 °C for 24 h, segregated, and characterized for various components. The overall average organic waste was > 55%, plastic waste about 17%, inert material about 10%, paper 9%, and cloth waste 7%. The calorific value of paper and plastic wastes exhibited was 4910 kcal/kg, while organic waste had a calorific value of 1980 kcal/kg. The proximate analysis showed that the moisture content ranged from 16 to 29%, volatile matter ranged from 49 to 72%, ash content ranged from 0.03 to 5%, and fixed carbon ranged from 5 to 20%. In S7, the volatile matter content recorded the lowest value at 49.15%, while in S5, the volatile matter content was notably higher at 71.84%, indicating easier ignition. Further, elemental analysis revealed that the major elements in MSW were carbon and oxygen, 53% and 37%, respectively, with small traces of heavy metals with an average of 0.02% cadmium (Cd) and 0.006% lead (Pb). Moreover, field emission scanning electron microscopy (FESEM) micrographs provided confirmation that the majority of components in the MSW exhibited either partial or complete degradation, resulting in a rough surface texture. In addition, the presence of silica and other silicate groups was also detected. Fourier transform infrared spectroscopy (FT-IR) analysis revealed that the main functional groups were alcohol. In the X-ray diffraction (XRD) analysis, all the major mineral phases were detected between 20 and 30° 2θ, except for the peaks at 50-60° 2θ in S3 and S9 where catalysts such as zeolite Y and zeolite X were detected. Overall, the MSW had low moisture content but higher calorific value, making it a viable feedstock.

Categorization of leaching behaviors of elements from commercially treated incineration bottom ash in Singapore.

Leaching of potentially hazardous substances, especially the heavy metals from Incineration Bottom Ash (IBA) is a major problem in its recyclable usage. To address this concern, treatment of IBA is indispensable before it can be reused. IBA subjected to laboratory-scale treatment typically yields clearer conclusions in terms of leaching behaviors, benefiting from the controlled laboratory environment. However, the leaching behaviors of commercially treated IBA appear to be more ambiguous due to the complex and comprehensive nature of industrial-scale treatments, where multiple treatment techniques are involved concurrently. Furthermore, treatment efficiencies vary among different plants. In this study, three types of commercially treated IBA were sampled from leading waste treatment companies in Singapore. Characterization and leaching tests were performed on the treated IBAs in both standardized and modified manners to simulate various scenarios. Besides deionized water, artificial seawater was used as a leachant in leaching tests for simulating seawater intrusion. The results reveal the promoting effect of seawater on the leaching levels of several elements from three types of treated IBA, which may require special attention for IBA application and landfill near the coast. Furthermore, the elements examined in these three types of commercially treated IBA generally comply with the non-hazardous waste acceptance criteria outlined in Council Decision, 2003/33/EC (2003), except Sb. By combining two leaching tests, the elements were categorized into different types of leaching behavior, making it possible to prepare and respond to the concerning leaching scenarios in future engineering applications.

Effect of geomembrane liner on landfill stability under long-term loading: interfacial shear test and numerical simulation.

Clay liners have been widely used in landfill engineering. However, large-scale clay excavation causes secondary environmental damage. This study investigates the feasibility of replacing clay liners with high-density polyethylene (HDPE) geomembranes with different specifications and parameters. Laboratory interface shear tests between municipal solid waste (MSW) samples of different ages and geomembranes were conducted to study the influence of landfill age on interface shear strength. Finite element method was adopted to compare the long-term stability of landfills with HDPE geomembrane versus clay as intermediate liner. The interfacial shear test results show that the cohesion of MSW increases in a short term and then decreases with landfill age. The internal friction angle exhibits an increasing trend with advancing age, however, the rate of its increment declines with age. The rough accuracy of the film surface can increase the interfacial shear strength between MSW. The simulation results show that, unlike clay-lined landfills, the sliding surface of geomembrane-lined landfills is discontinuous at the lining interface, which can delay the penetration of slip surfaces and block the formation of slip zone in the landfill. In addition, the maximum displacement of landfills with geomembrane is 10% lower than that with clay, and the absolute displacement of slope toe decreases with the increase of roughness at the interface of geomembrane. Compared with clay-lined landfills, the overall stability safety factor increased by 18.5-30%. This study provides references for landfill design and on-site stability evaluation, contributing to enhanced long-term stability.

A numerical model for the prediction of radon flux from uranium mill tailings at Jaduguda, India.

Solid process fine waste or tailings of a uranium mill is a potential source of release of radiologically significant gaseous radon (222Rn). A number of variables such as radium (226Ra) content, porosity, moisture content, and tailings density can affect the extent of emanation from the tailings. Further, if a cover material is used for remediation purposes, additional challenges due to changes in the matrix characteristics in predicting the radon flux can be anticipated. The uranium mill tailings impoundment systems at Jaduguda have been in use for the long-term storage of fine process waste (tailings). A pilot-scale remediation exercise of one of the tailings ponds has been undertaken with 30 cm soil as a cover material. For the prediction of the radon flux, a numerical model has been developed to account for the radon exhalation process at the remediated site. The model can effectively be used to accommodate both the continuous and discrete variable inputs. Depth profiling and physicochemical characterization for the remediated site have been done for the required input variables of the proposed numerical model. The predicted flux worked out is well below the reference level of 0.74 Bq m-2 s-1 IAEA (2004).

Experimental study on municipal solid waste incineration bottom ash as a component of alkali-activated coal gangue-based geopolymer.

This study explores the potential of municipal solid waste incineration bottom ash (MSWI BA) and coal gangue as precursors for alkali-activated cementitious materials (CG-MBA). An examination of the impact of MSWI BA content, NaOH/Na2SiO3 ratio, liquid-solid ratio, and NaOH concentration on strength and reaction through the application of diverse analytical methodologies. Results demonstrate that CG-MBA offers significant environmental benefits compared to conventional cement. When used as a construction filling material, CG-MBA exhibits a remarkable 74.5 ~ 79.2 wt% reduction in carbon dioxide emissions and 70.6 ~ 77.0 wt% reduction in energy consumption. Additionally, CG-MBA effectively immobilizes heavy metal ions in MSWI BA, with a fixation efficiency exceeding 56.0%. These findings suggest that CG-MBA is a promising sustainable solution for waste management, offering significant environmental benefits while demonstrating effective heavy metal immobilization. This approach contributes to pollution control and promotes environmental sustainability in the construction industry.

Methacrylic acid in situ modified steel converter slag/natural rubber composites: Resourceful utilization of steelmaking solid wastes.

As a by-product of the steelmaking industry, the large-volume production and accumulation of steel converter slag cause environmental issues such as land occupation and dust pollution. Since metal salts of unsaturated carboxylic acid can be used to reinforce rubber, this study explores the innovative application of in-situ modified steel slag, mainly comprising metal oxides, with methacrylic acid (MAA) as a rubber filler partially replacing carbon black. By etching the surface of steel slag particles with MAA, their surface roughness was increased, and the chemical bonding of metal methacrylate salt was introduced to enhance their interaction with the molecular chain of natural rubber (NR). The results showed that using the steel slag filler effectively shortened the vulcanization molding cycle of NR composites. The MAA in-situ modification effectively improved the interaction between steel slag and NR molecular chains. Meanwhile, the physical and mechanical properties, fatigue properties, and dynamic mechanical properties of the experimental group with MAA in-situ modified steel slag (MAA-in-situ-m-SS) were significantly enhanced compared with those of NR composites partially filled with unmodified slag. With the dosage of 7.5 phr or 10 phr, the above properties matched or even exceeded those of NR composites purely filled with carbon black. More importantly, partially replacing carbon black with modified steel slag reduced fossil fuel consumption and greenhouse gas emission from carbon black production. This study pioneered an effective path for the resourceful utilization of steel slag and the green development of the steelmaking and rubber industries.

Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria.

Austria must recycle more packaging materials. Especially for plastic packaging waste, significant increases are necessary to reach the EU recycling targets for 2025 and 2030. In addition to improving separate collection and introducing a deposit system for specific fractions, the share of plastic packaging in mixed municipal solid waste (MSW) could be utilized. In Austria, about 1.8milliontonnes of mixed MSW are generated. This includes about 110,000 t/a of plastic packaging waste. Most of the mixed MSW (94 %) is sent directly or via residues from pre-treatment, such as mechanical-biological treatment or waste sorting, to waste incineration. While materials such as glass and metals can also be recovered from the bottom ash, combustible materials such as plastics must be recovered before incineration. This work aims to evaluate the recovery potential of plastic packaging waste in mixed MSW with automated waste sorting. For this purpose, two of the largest Austrian waste sorting plants, with a total annual throughput of about 280,000 t/a, were investigated. The investigation included regular sampling of selected output streams and sorting analysis. The results show that the theoretical recovery potential of plastic packaging from these two plants is 6,500 t/a on average. An extrapolation to Austria results in a potential of about 83,000 t/a. If losses due to further treatment, such as sorting and recycling, are considered, about 30,000 t/a of recyclate could be returned to plastic production. This would correspond to an increase in plastic packaging recycling rate from 25 % to 35 %.

Investigation on trommeled legacy waste from full-scale mining of old dumpsites: Suitable for valorization or scientific disposal?

The burgeoning interest in resource recovery from old dumpsites has significantly propelled the adoption of Landfill Mining (LFM) in recent years. This study is centred around evaluating the quality of materials recovered from the full-scale LFM activities at two major dumpsites in India, focusing on the valorization potential of the segregated legacy waste. A detailed analysis was conducted on the segregated waste fractions based on particle size (-30 mm, 30 to 6 mm, and -6 mm, as sourced from the sites), employing both batch and column leaching methods across a range of liquid-to-solid (L/S) ratios (0.1-10.0 L/kg). The findings reveal a pronounced concentration of contaminants within the -6 mm fraction compared to the 30 to 6 mm and -30 mm fractions. Column leaching tests revealed a reduction in contaminant concentration, correlating with incremental changes in L/S ratio. Notably, this trend remained consistent across varying particle sizes and specific type of contaminants assessed. Notably, color intensity of leachate reduced significantly from 720 to 1640 Platinum Cobalt Units (PCU) at an L/S ratio of 0.1 L/kg to a minimal 94-225 PCU at an L/S of 10 L/kg. Dissolved salts emerged as a primary concern, marking them as significant contaminants in both leaching methods. The analysis confirmed that the segregated fractions comply with the USEPA Waste Acceptance Criteria (WAC), permitting their disposal in non-hazardous waste landfills. However, the elevated presence of dissolved salts, exceeding reuse limits by 5-35 times, limits their open or unrestricted reuse. Despite this, isolated reuse aligns with regulations from the Netherlands and Germany, suggesting viable pathways for compliant utilization. Geotechnical assessments indicate the potential for repurposing the -30 mm fraction as alternative earthfill and construction material. While heavy metal leaching does not pose significant concerns, the prevalent unscientific disposal practices near urban settlements highlight potential human health risks. This investigation enriches the understanding of the physicochemical properties, leaching behaviour, and reuse potential of segregated legacy waste, offering crucial insights for civic authorities in determining appropriate reuse and disposal strategies for such materials.

Semi-permeable membrane-covered high-temperature aerobic composting: A review.

Semi-permeable membrane-covered high-temperature aerobic composting (SMHC) is a suitable technology for the safe treatment and disposal of organic solid waste as well as for improving the quality of the final compost. This paper presents a comprehensive summary of the impact of semi-permeable membranes centered on expanded polytetrafluoroethylene (e-PTFE) on compost physicochemical properties, carbon and nitrogen transformations, greenhouse gas emission reduction, microbial community succession, antibiotic removal, and antibiotic resistance genes migration. It is worth noting that the semi-permeable membrane can form a micro-positive pressure environment under the membrane, promote the uniform distribution of air in the heap, reduce the proportion of anaerobic area in the heap, improve the decomposition rate of organic matter, accelerate the decomposition of compost and improve the quality of compost. In addition, this paper presents several recommendations for future research areas in the SMHC. This investigation aims to guide for implementation of semi-permeable membranes in high-temperature aerobic fermentation processes by systematically compiling the latest research progress on SMHC.

Integrated assessment of pollution status of MSW sites: a case study of Uyo, Ikot Ekpene and Oron, Akwa Ibom State, southern Nigeria.

One of the main causes of contaminated groundwater in emerging nations is improper trash disposal in urban areas, which affects the level of groundwater contamination caused by contaminants of municipal solid waste (MSW) origin within the three local government headquarters in Akwa Ibom State, southeastern Nigeria. The main thrust of this research survey is to assess the level of groundwater contaminations and their consequences. The research used statistical data generated from the Electrical Resistivity Survey (ERS) in combination with hydrogeochemical investigations. Analysis of variance of resistivity between Uyo, Ikot Ekpene and Oron was carried out. The test result indicated significant difference in contamination among the three cities. This was followed by a t-test between each pair of dump and control sites in the three cities. The test results showed significant difference between each control and dumpsite. The results showed that leachate layer conductivity is always higher than that of the layer above it. All water samples from boreholes close to the dumpsites were identified by hydrogeochemical analysis to exhibit pH (3.70-4.15) lower than the permissible limit of the WHO; few water samples exhibit increased electrical conductivity (EC), cadmium and total dissolved solids (TDS). Similarly, the bacteriological analyses indicated a high level of microbial load due to the waste dump. Formations found in boreholes close to the dumpsite have litho-correlations which depict intercalations of comparatively impermeable and porous materials. The findings reveal that leachate (contaminate) travels slowly downward, allowing for physical, chemical and biological processes to filter out impurities before they get to the aquifer. It is recommended that no new water supply wells should be placed in areas of abnormally low resistivity and physicochemical and bacteriological parameters, until the reasons for these values are properly assessed.

Stabilization of heavy metals in solid waste and sludge pyrolysis by intercalation-exfoliation modified vermiculite.

Increasing amounts of solid waste and sludge have created many environmental management problems. Pyrolysis can effectively reduce the volume of solid waste and sludge, but there is still the problem of heavy metal contamination, which limits the application of pyrolysis in environmental management. The intercalated-exfoliated modified vermiculite (IEMV) by intercalators of sodium dodecylbenzene sulfonate, hexadecyltrimethylammonium bromide and octadecyltrimethylammonium bromide were used to control the release of Cd, Cr, Cu, Zn and Pb during pyrolysis process of sludge or solid waste. The retention of heavy metals in sludge was generally better than that in solid waste. The IEMV by octadecyltrimethylammonium bromide as the intercalator calcined 800 °C (STAB-800) was the best additive for heavy metal retention, and the retention of Cr, Cu and Zn was significantly better than that of Pb and Cd. Cr, Cu, Zn and Pb were at low risk, while Cd had considerable risk under certain circumstances. New models were proposed to comprehensively evaluate the results of the risk and forms of heavy metals, and the increasing temperature was beneficial in reducing the hazards of heavy metals by the addition of STAB-800. The reaction mechanism of heavy metals with vermiculite was revealed by simulation of reaction sites, Fukui Function and Frontier Molecular Orbital. Thermal activation-intercalated-exfoliated modified vermiculite (T-IEMV) is more reactive and had more active sites for heavy metals. Mg atoms and outermost O atoms are the main atoms for T-IEMV to react with heavy metals. The Cr, Cu and Zn have better adsorption capacity by T-IEMV than Pb and Cd. This study provides a new insight into managing solid waste and sludge and controlling heavy metal environmental pollution.

Overview of municipal solid waste management in sub-tropical climatic region of North Eastern India.

Municipal solid waste management (MSWM) is perceived as a global issue regardless of the place of waste generation. The amount of unmanaged waste is increasing rapidly, along with its impact on the environment and human health. In hilly areas, specifically the North Eastern Region (NER) states of India, due to the unique topography coupled with socio-economic factors, there are inadequate waste management practices marked by insufficient infrastructure, minimal research studies, and limited data availability. This paper comprehensively reviews the existing status of MSWM practices and waste treatment technologies, identifies the challenges, and discusses the prospective approaches for MSWM in NER states of India. NER, is characterized by its hilly terrain and has the most diverse demographic profile in the country. The study highlights the notable increase in waste generation in the urban population in NER. The total amount of waste generated in NER is about 2907 tons per day, with a collection rate of 86.96%, treatment at 31.09%, and landfilling at 33.67%. The biodegradable fraction makes up the majority of waste composition (more than 50%) in NER, followed by recyclables and inert. The existing MSWM consists of waste collection, transportation, and disposal with limited source segregation and treatment. All the states of NER practice open dumping and burning as the primary waste treatment and disposal system. The study discusses the challenges and prospects to ensure effective MSWM in NER. This review is a region-specific study that considers cultural diversity, topography, and socio-economic dynamics. The outcome of this review will be helpful to the researchers and policymakers in making appropriate waste management plans and improve the MSWM system in NER.

Effect of long-term dry-wet circulations on the Solidification/stabilization of Municipal solid waste incineration fly ash using a novel cementitious material.

Solidification/stabilization (S/S) is a typical technique to immobilize toxic heavy metals in Municipal solid waste incineration fly ash (MSWI FA). This study utilized blast furnace slag, steel slag, desulfurization gypsum, and phosphoric acid sludge to develop a novel metallurgical slag based cementing material (MSCM). Its S/S effects of MSWI FA and long-term S/S effectiveness under dry-wet circulations (DWC) were evaluated and compared with ordinary Portland cement (OPC). The MSCM-FA block with 25 wt.% MSCM content achieved 28-day compressive strength of 9.38 MPa, indicating its high hydration reactivity. The leaching concentrations of Pb, Zn and Cd were just 51.4, 1895.8 and 36.1 µg/L, respectively, well below the limit standard of Municipal solid wastes in China (GB 16889-2008). After 30 times' DWC, leaching concentrations of Pb, Zn and Cd for MSCM-FA blocks increased up to 130.7, 9107.4 and 156.8 µg/L, respectively, but considerably lower than those for OPC-FA blocks (689, 11,870.6 and 185.2 µg/L, respectively). The XRD and chemical speciation analysis revealed the desorption of Pb, Zn and Cd attached to surface of C-S-H crystalline structure during the DWC. The XPS and SEM-EDS analysis confirmed the formation of Pb-O-Si and Zn-O-Si bonds via isomorphous replacement of C-A-S-H in binder-FA blocks. Ettringite crystalline structure in OPC-FA block was severely destructed during the DWC, resulting in the reduced contents of PbSO4 and CaZn2Si2O7·H2O and the higher leachability of Pb2+ and Zn2+.

Global perspective of municipal solid waste and landfill leachate: generation, composition, eco-toxicity, and sustainable management strategies.

Globally, more than 2 billion tonnes of municipal solid waste (MSW) are generated each year, with that amount anticipated to reach around 3.5 billion tonnes by 2050. On a worldwide scale, food and green waste contribute the major proportion of MSW, which accounts for 44% of global waste, followed by recycling waste (38%), which includes plastic, glass, cardboard, and paper, and 18% of other materials. Population growth, urbanization, and industrial expansion are the principal drivers of the ever-increasing production of MSW across the world. Among the different practices employed for the management of waste, landfill disposal has been the most popular and easiest method across the world. Waste management practices differ significantly depending on the income level. In high-income nations, only 2% of waste is dumped, whereas in low-income nations, approximately 93% of waste is burned or dumped. However, the unscientific disposal of waste in landfills causes the generation of gases, heat, and leachate and results in a variety of ecotoxicological problems, including global warming, water pollution, fire hazards, and health effects that are hazardous to both the environment and public health. Therefore, sustainable management of MSW and landfill leachate is critical, necessitating the use of more advanced techniques to lessen waste production and maximize recycling to assure environmental sustainability. The present review provides an updated overview of the global perspective of municipal waste generation, composition, landfill heat and leachate formation, and ecotoxicological effects, and also discusses integrated-waste management approaches for the sustainable management of municipal waste and landfill leachate.